Foam pump

    Brief Introduction for Foam Pump:
    F series foam pump is a newly type generation product that be researched and developed on the basis of bringing and absorbing the advanced technology from both home and abroad. The company made continuous efforts to marketing this series of pump, and now they are widely applied in metallurgy, coal mining, chemical and other industrial sectors. The products are suitable for pumping abrasive and erosive slurry and bubbles and foams. This series of pump can effectively eliminate the foams and bubbles out of the slurry during the operation. Even the feed-in material is not enough, the pump can still work normally, which especially applied in various of flotation process, it is an ideal pump product for conveying foam type slurry.

    Structural Features:
    The pump head use double shell structure, the flow-parts use hard nickel, high chromium or rubber material, and its driving section is universal with SP(R) type pump. Hopper charging box use steel plate structure, liner plate can be covered if the conveying media required, and the pump outlet opening position can be interval changed by 45°. This series of pump can effectively eliminate the foams and bubbles out of the slurry during the operation. Even the feed-in material is not enough, the pump can still work normally.

    Application Scope:
    The series of foam pump widely applied in various of flotation process, it is an ideal pump without any shaft seal or shaft seal water specially for conveying foam or bubble type slurry, and its conveying and pumping capacity is much bigger than other type products.

    Meanings of the model: MF2Q
    2----Press Out Diameter of 2inches
    Q----Bracket Style
    F----Foam Pump
    M---- Wear-resistant high chromium alloy

    F Series of Foam Pump Performance Parameters: