- - Coal Mining Slurry Pump
- - Slurry Pump
- - Rubber slurry pump
- - Gravel pump
- - High head slurry pump
- - Vertical slurry pump
- - Wear slurry pump
- - Foam pump/Froth Pump
- - Cover Plate Liner,Frame Plate Liner
- - Expeller Ring
- - Front Plate
- - Impeller
- - Volute Liner
- - Medium slurry pump
- - SP vertical slurry pump
- - Light slurry pump
- - Bearing Assembly
- - Rubber parts
Why should regularly backup slurry pump drive car ?
The normal operation of the slurry slurry pump , generally only one, because a large slurry pump and two small slurry pumps work in parallel rather , ( refer to lift the same flow rate ) , large slurry pumps more efficient than small slurry pump , so to speak rather from the energy point of view Select a large slurry pump instead of two small slurry pumps , but under the following circumstances , consider two slurry pumps in parallel cooperation :
Flows, a slurry pump can not reach this traffic .
50% of the need for large slurry pumps standby rate , can be changed two smaller slurry pump , two spare ( of three )
For some large slurry pumps , the slurry pump can be used in parallel operation required 70% of the flow , do not spare slurry pump when a slurry pump overhaul , slurry pump still bear another 70% of the production of transport .
Non-stop for 24 hours of continuous operation requires a slurry pump , should spare three slurry pumps , one running, one standby , one maintenance.
slurry slurry pump Under normal circumstances, are required to have a spare slurry pump , spare slurry pump for on-site storage What precautions do ? Why should regularly drive a car?
First , with the impeller shaft , the sheath , and other accessories front fender , in the long axis of the force of gravity causes the bending deformation can be changed frequently jigger axis direction of the force , the bending deformation of the shaft is minimized ; secondly , check the tightness with moving elements , to avoid stationary and moving parts due to long-term rust , the slurry pump can always be in standby mode ; disk drive can be taken to all parts of the bearing lubricant to prevent bearing rust, and because preliminary lubricated bearings , when a state of emergency can be started immediately .
Why should regularly backup slurry pump drive car ?